IO1 Firmware is not updating

IO1 Firmware is not updating

If you have an IO1 that is not updating please try the following to force it to update :
  1. Check if the speaker is connected to the internet (remove back over and the green light should be on) see Article check Network connection
  2. Turn off IO1 for 20 seconds and then turn back on
  3. Check the Lithe Audio App settings of the speaker, at the bottom it shall show Firmware. You can check here if the fw is up to date.
The speaker shall auto update when a new firmware is available and check on the OTA server every 4 hours.

If you have any further issues please contact Support@litheaudio.com

    • Related Articles

    • How to apply manual firmware update to Wi-Fi V1 speaker

      If you are experiencing any issues updating the firmware through the Lithe Audio APP you can update this through the backend of the speaker via a web browser as instructed by our support team. PLEASE NOTE: Do NOT turn off the power to the speaker or ...

    • WiFi music sources dropping / firmware not updating router fix.

      If you find that your speaker is unable to update to the latest firmware, or music sources are stopping intermittently this may be due to a protocol on your home router stopping this from happening.  To get to this setting you need to access the back ...

    • SoundSend - How to update the Firmware?

      Here is a link to the Wisa firmware page with the latest files. Once downloaded, as per link above.... 1. Extract the bin file from the .zip archive file to your laptop/desktop computer. NOTE: You must extract the file from the archive (compressed ...

    • How to manually update a Wi-Fi V2, PRO and Subwoofer

      This article explains how to apply a manual firmware update for the Wi-Fi V2, PRO and Subwoofer. Here is a video explain how the firmware is applied and bellow a step by step on how to apply. 1. The IP address of the speaker needs to be identified. ...

    • What to do if the firmware update doesn't work?

      If there is an update available within the Lithe Audio app, the following (orange refresh) icon will appear (as shown in the image below). Once selected, if the update doesn't take effect then you will need to do the following: Power off the speaker ...