What to do if the firmware update doesn't work?

What to do if the firmware update doesn't work?

If there is an update available within the Lithe Audio app, the following (orange refresh) icon will appear (as shown in the image below). 


Once selected, if the update doesn't take effect then you will need to do the following:

  1. Power off the speaker from the mains for a minute and leave it. 
  2. Power back up and reset the speaker, this can be done by pressing and holding the reset button on the face of the speaker. Hold for 10 seconds and once complete you then need to set up the speaker as new, going through the original setup process.   


When completed, go back into the Lithe Audio app, retry the update process then it should work.


(The above image showing update icon) 

    • Related Articles

    • What to do if the firmware update doesn't download through the app ?

      If there is an update available within the Lithe Audio app, the following (orange refresh) icon will appear (as shown in the image below).  Once selected, if the update doesn't take effect then you will need to do the following: Power off the speaker ...
    • WiFi music sources dropping / firmware not updating router fix.

      If you find that your speaker is unable to update to the latest firmware, or music sources are stopping intermittently this may be due to a protocol on your home router stopping this from happening.  To get to this setting you need to access the back ...
    • Why does my speaker keep disconnecting?

      There are a number of reasons why the WiFi connection is disconnecting here are the most common: Interference from other devices operating within the 2.4GHz or 5GHz band. Such as Microwaves, cameras, LCD displays, etc... This could be due to the ...
    • What is Bluetooth 5.0 and how does it work?

      In our Bluetooth speaker range, we now have Bluetooth 5.0, you may be wondering, what is BT 5.0?  This version is a lot more powerful than the last version (4.2) so with this in mind, there are many benefits.  One of the new benefits is the increase ...
    • Grouping not working

      If you are finding, when grouping the speaker this un groups itself, please check the firmware of each speaker is to the latest version. Go to speaker settings> firmware is displayed at the bottom of the page, or an orange round icon displayed on the ...