What to do if the firmware update doesn't download through the app ?
If there is an update available within the Lithe Audio app, the following (orange refresh) icon will appear (as shown in the image below).
Once selected, if the update doesn't take effect then you will need to do the following:
- Power off the speaker from the mains for a minute and leave it.
- Power back up and reset the speaker, this can be done by pressing and holding the reset button on the face of the speaker. Hold for 10 seconds and once complete you then need to set up the speaker as new, going through the original setup process.
When completed, go back into the Lithe Audio app, retry the update process then it should work.
(The above image showing update icon)
What to do if the firmware update doesn't work?
If there is an update available within the Lithe Audio app, the following (orange refresh) icon will appear (as shown in the image below). Once selected, if the update doesn't take effect then you will need to do the following: Power off the speaker ...
How to change the name and pin number using the Lithe Audio BT App
Download the Lithe Audio BT App from either Apple App Store or Google Play store. 1. Open the Lithe Audio BT 5 setup app, the app shall search for the speaker. 2. Select the speaker (Lithe Audio BT2) 3. Setup an Admin password, Make a note of the ...
WiFi music sources dropping / firmware not updating router fix.
If you find that your speaker is unable to update to the latest firmware, or music sources are stopping intermittently this may be due to a protocol on your home router stopping this from happening. To get to this setting you need to access the back ...
Why does my speaker keep disconnecting?
There are a number of reasons why the WiFi connection is disconnecting here are the most common: Interference from other devices operating within the 2.4GHz or 5GHz band. Such as Microwaves, cameras, LCD displays, etc... This could be due to the ...
How to setup WiFi speaker to home network via Android app?
Download the Lithe Audio android app from the google store Lithe audio here Make sure you are connected to the 2.4Ghz WiFi network on your router, otherwise you cannot connect to the speakers. Power on the WiFi speaker this shall take a minute or so ...