The Lithe Audio Cinema Hub replaces a traditional home theatre receiver. It connects to your home network, streams music via AirPlay or Spotify Connect, handles external media devices, and sends high-resolution audio wirelessly to your speakers.

Step 1: Connect Your TV and Video Sources

1. Place the Cinema Hub in your media cabinet or near your TV display.

2. Connect an HDMI cable from the Hub's HDMI eARC Out port to your TV's HDMI eARC/ARC port.

3. Plug external gear—like a PlayStation, Xbox, Apple TV, or Blu-ray player—directly into the Hub's HDMI Input 1, 2, or 3 ports.

4. Plug the Cinema Hub into a power outlet.

Step 2: Kick the Speakers into WiSA Mode

Go to your installed speakers to activate their wireless pairing states:

• For Pro Series In-Ceiling Speakers: Insert the WiSA Bolt-On Module, turn on power, and press the Reset Button for 1 second. Look for the purple LED and listen for the audio chime. if you do not hear a chime, repeat.

• For iO1(WISA ENABLED) Speakers: Power the unit on and press the PAIR button on the back. Listen for the audio chime and look for the purple LED.

• Both speaker types are now broadcasting their pairing signal, waiting for the Hub to scan them.

Step 3: Connect the Hub to Your Home Wi-Fi

The Cinema Hub utilizes your home network to let you cast music directly from your phone.

1. Download and open the Google Home App on your smartphone.

2. Turn on the Cinema Hub. The Wi-Fi LED on the front panel will flash rapidly.

3. In the Google Home App, tap the + icon and select Set up device > New device.

4. Select the "Lithe Audio Cinema Hub" when it appears, and follow the prompts to connect it to your home Wi-Fi network. The front LED will turn solid white when successful.

Step 4: Sync the Metal Remote Control

1. Place 2x AAA batteries into the remote.

2. Press and hold the physical Pair button on the back panel of the Cinema Hub console for 3 seconds. The status light will flash quickly.

3. Press any button on the remote. The flashing light on the Hub will go solid, confirming the remote is paired.

Step 5: On-Screen Display (OSD) Speaker Setup

1. Turn on your TV and switch its input source to the HDMI port where the Cinema Hub is plugged in.

2. Press the Menu button on your Lithe Audio remote control to bring up the setup menu on your TV screen.

3. Navigate to Speaker Setup > Wireless Pairing and select Scan.

4. The Hub will search the room and list all discovered purple-LED speakers on your TV screen.

5. Highlight a speaker on the list using your remote arrows to play a test tone. When you hear the speaker sound off, simply select its correct room position (e.g., Center Channel, Left Surround, or Subwoofer) from the TV's drop-down menu.

Step 6: Personalize via the Lithe Audio Cinema App

To put the final touches on your system, download the Lithe Audio Cinema App. It will automatically discover your Hub over Wi-Fi, allowing you to fine-tune individual volume levels, adjust the equalizer for crisp dialogue, and crank up your WiSA Subwoofer.