This video shall explain how to wire a Lithe Audio Power driver.
Please note: Wiring instruction for UK typical installation only.
How to connect
1. Remove the driver connection cover (2 Screws)
2. Insert the correct wiring cables for Live, Neutral and Earth.
3. Make sure the cable sheath is clamped within the driver (no exposed cable)
4. Screw the connection cover back on. (2 screws)
5. Connect the other end of the cable to either directly into a socket or connected into the lighting circuit via a 3A fused spur (UK).
If mounting driver on the joist or rafter; Within the terminal block, punch the screw point with a tool and fix 2 positions as shown in the video above.
In this article, we will explain what is the best way to connect to a TV using our Lithe Audio speaker. We understand this will depend on what version of speaker you have. Lithe Audio Bluetooth Speaker There are a couple of ways to connect to a TV ...
Open the Lithe Audio BT5 APP, you have the option to activate or deactivate the Lithe Link function. This allows you to control a 4/6 speaker system, enabling you to turn off the second/third set of speakers, leaving only the primary master pair in ...
Please Download the BT Lithe Audio App NOTE: This update only works on new version Bluetooth 5.0 speakers from March 2020 onwards. (If in doubt please contact us) iOS app store: https://apps.apple.com/gb/app/la-bt-5-setup/id1510569987 Android Google ...