How to Pair Remote to the Cinema Hub
How to Pair Remote to the Cinema Hub
- Connect power supply, plug the included power adapter into the Cinema Hub and turn ON plug socket.

- Unscrew the bottom plate of
the remote using the included
Allen key
- Insert 2x AAA batteries into your remote.
- Make sure batteries are inserted into +/- correctly, as indicated
on the inside of the remote.
- Make sure your Cinema Hub is ON before starting the pairing process.
- Press and hold the ‘Pair’ button
on back of the Cinema Hub for 3
seconds until the WiSA LED on
the REAR of the Cinema Hub starts blinking rapidly.

- Press any button on the remote,
if pairing is successful, the
‘WiSA LED’ on the rear of the
hub will stop blinking.
- When pressing any button on
the remote, the ‘WiSA LED’
should blink once on the Cinema Hub.
Related Articles
Spec Sheet - Cinema Hub
Please download the Cinema Hub Spec Sheet via link -
Connection Diagram - Cinema Hub
Please download the Cinema Hub connection diagram via link -
Documents - Cinema Hub
Please download the Cinema Hub user manual via link -
What is included in the Cinema Hub box
What is included in the Cinema Hub box Antenna - To boost the signal of the Hub attached to the Rear of the Hub Power Adapter - To connect the power supply into plug socket and in the dc socket to the Rear of the Cinema Hub Remote - To control the ...
What are the Inputs/Outputs of the Cinema Hub
What are the Inputs/Outputs of the Cinema Hub The Cinema Hub has variety or Optical and Analogue inputs please see below: 3x HDMI Inputs - Connect an HDMI source using HDMI cable from the ‘HDMI (in)’ ports on the REAR of the Cinema Hub to the correct ...