How to Mount IO1 speaker using Pendent Mount?

How to Mount IO1 speaker using Pendent Mount?

Pendent Mount Application:

Ideal to Suspend from a roof/vaulted ceiling using a chain/cable over a table in an indoor and outdoor area. 



NOTE: You will require the Eyelet Kit for this mount.  (Not included)


1. As per the image on the right attach the cables into the back of the speaker.

2. Remove metal grille and the rubber bungs as shown, insert the m4 x 90mm screws through the speaker.

3. The screw fixing shall protrude through the back of the speaker by 10mm. Fix the pendent eyelet to protruding screws (2 Positions).

4. Ensure to tighten but not overtighten. Where required you can use 3M thread lock. (not supplied).

5. With the eyelets in place you can now suspend from your ceiling via metal wire or hangers to suit. (not supplied). 

    • Related Articles

    • How to Mount IO1 speaker 6-ways?

      IN A CORNER Application: Ideal for any corner such as eaves in the garden or corners of rooms. You can mount horizontally or vertically. 1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical ...

    • How to Mount IO1 speaker On Wall

      On Wall Application: This method is ideal for either side of the TV, patio doors on wall mount application, focusing audio front facing direct to an indoor or outdoor seating area. 1. Using the hole template, mark out the holes on the wall, make sure ...

    • My rock speaker has stopped working

      If for any reason your rock speaker has stopped working this may be due to the power supply.  1. Disconnect the power supply from the socket.  2. Make sure the power cable doesn't have any exposed cable or splits.  3. Check to see if power is present ...

    • How to Setup Speaker Layout Options

      Setup Speaker Layout Options Understand and Choose the Right Layout for Your Surround or Atmos Setup Why This Step Matters Choosing the correct layout ensures: The correct audio signals are sent to the right speakers Your system decodes content ...

    • How to Mount IO1 Speaker On a Corner

      On a Corner Application: This method is ideal for any corner mount application where you may not have much space to place the speaker OR mounted directly onto a post/pillar focusing the audio direct to the listening area. 1. Using the hole template, ...