How to Mount IO1 speaker On Wall
On Wall Application:
This method is ideal for either side of the TV, patio doors on wall mount application, focusing audio front facing direct to an indoor or outdoor seating area.
1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical cable before drilling holes for wall plugs (2 positions).
3. As per the image on the right attach the cables into the back of the speaker.
4. Remove metal grille and the rubber bungs as shown, insert the m4 x 90mm screws through the speaker.
5. Ensure to add the spacers 2 positions between speaker and wall bracket.
6. Index the wall mount on speaker groove. Be careful not to over tighten the screws. Refit the 2 rubber bungs and metal grille.
Related Articles
How to Mount IO1 speaker 6-ways?
IN A CORNER Application: Ideal for any corner such as eaves in the garden or corners of rooms. You can mount horizontally or vertically. 1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical ...My rock speaker has stopped working
If for any reason your rock speaker has stopped working this may be due to the power supply. 1. Disconnect the power supply from the socket. 2. Make sure the power cable doesn't have any exposed cable or splits. 3. Check to see if power is present ...How to Mount IO1 Speaker On a Corner
On a Corner Application: This method is ideal for any corner mount application where you may not have much space to place the speaker OR mounted directly onto a post/pillar focusing the audio direct to the listening area. 1. Using the hole template, ...How to Mount IO1 Speaker In a Corner
In a Corner Application: Ideal for any corner such as in the eaves or corners of rooms. You can mount horizontally or vertically. 1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical cable ...How to Mount IO1 speaker using Pendent Mount?
Pendent Mount Application: Ideal to Suspend from a roof/vaulted ceiling using a chain/cable over a table in an indoor and outdoor area. NOTE: You will require the Eyelet Kit for this mount. (Not included) 1. As per the image on the right attach the ...