This method is ideal for any corner mount application where you may not have much space to place the speaker OR mounted directly onto a post/pillar focusing the audio direct to the listening area.
1. Using the hole template, markout the holes on the wall, make sure to check for water pipes or electrical cable before drilling holes for wall plugs (2 positions).
2. Fix the mounting bracket onto the corner wall using M4 x 40mm (2 Positions).
3. Attach the cables into the back of the speaker.
4. Remove metal grille and the rubber bungs as shown, insert the m4 x 90mm screws through the speaker.
5. Ensure to add the spacers 2 positions between speaker and wall bracket.
6. Index the wall mount on speaker groove. Be careful not to over tighten the screws. Refit the 2 rubber bungs and metal grille.
In a Corner Application: Ideal for any corner such as in the eaves or corners of rooms. You can mount horizontally or vertically. 1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical cable ...
IN A CORNER Application: Ideal for any corner such as eaves in the garden or corners of rooms. You can mount horizontally or vertically. 1. Using the hole template, mark out the holes on the wall, make sure to check for water pipes or electrical ...
Can the Speaker Grille Be Painted? Yes, the speaker grille can be painted to match your ceiling for a seamless and discreet finish. Recommended Painting Methods The grille can be painted using: Spray paint Standard household paint Important Painting ...
If for any reason your rock speaker has stopped working this may be due to the power supply. 1. Disconnect the power supply from the socket. 2. Make sure the power cable doesn't have any exposed cable or splits. 3. Check to see if power is present ...
Speaker Ceiling Size & Installation Requirements When planning your installation, it is important to understand the total visible size of the speaker on the ceiling, as well as the ceiling space required for mounting. Speaker Dimensions Hole Cut-out ...