How to Connect IO1 via Airplay

How to Connect IO1 via Airplay

Airplay Setup For IOS

​

2 Scenarios for Airplay setup

  1. Brand new out of the box the iO1 shall flash led green to the rear, indicating ready for pair mode
  2. Change of router, press the button on the back of the iO1 to place speaker in pairing mode Or wait 2 minutes for the speaker to be unable to connect to then start the pairing process if not found
Please follow the instructions below to connect:

1. Open the Settings > Wi-Fi settings. 

2. IO1 shall appear as an Airplay speaker to connect as below:  





3. Now you can rename the speaker and then make sure that your network you are trying to get the speaker connected onto is ticked at the top. Afterwards,

4. Press NEXT on the top right and your speaker will add and join the network. 



All completed and added to the network, you can now use the speaker on Airplay on your iOS device.

Enjoy your new IO1 speaker! If you have any questions, please contact support@litheaudio.com for more assistance.