How to connect WiSA Subwoofer hardwired to traditional AVR?

How to connect WiSA Subwoofer hardwired to traditional AVR? 

The Lithe Audio 8" Subwoofer can work with any make or model of AVR via the line output, as well as providing futureproofing for WiSA setups.

To connect the WiSA Subwoofer to an amplifier AVR using the line output, follow the steps below:

1. Connect to Device - Connect line input with the processor or AVR line-output. If using multiple subwoofers, link them via line-out to line-in on the next subwoofer (Daisy Chaining)

2. Connect Power - Connect the WiSA Subwoofer to the mains via the power lead provided and turn on at the wall socket and via the switch on the back of the subwoofer as shown

 

All set, after connecting the WiSA Subwoofer via line outputs, you are ready to adjust playback level, lowpass frequency and standby time to match your setup. 

• Related Articles

• User Manual - WiSA SubWoofer

  Please download the WiSA SubWoofer User Manual via link -

• Spec Sheet - WiSA SubWoofer

  Please download the WiSA SubWoofer Spec Sheet via link -

• The Subwoofer Sounds "Hollow" or Lacks Punch

  Weak or Missing Bass from the WiSA Cinema Subwoofer If your Lithe Audio WiSA Cinema Subwoofer is connected and playing audio, but the bass feels weak, thin, or almost non-existent at your main seating position, this is often caused by: Acoustic Phase ...

• Connection Diagram - WiSA SubWoofer

  Please download the WiSA SubWoofer Connections Diagram via link -

• SoundSend settings for 3rd Party Subwoofer

  Issue: Subwoofer not producing enough bass. This will be due to the speaker trim settings and audio settings within the SoundSend APP. At Lithe Audio, we have tested this, and the following settings were found to be the best audio output. If the user ...