How to connect WiSA Subwoofer to WiSA transmitter?

How to connect WiSA Subwoofer to WiSA transmitter? 

The Lithe Audio 8" Subwoofer can work with any WiSA HT certified transmitter to enhance the Cinematic experience to another level.

To pair the WiSA Subwoofer with the transmitter, follow the steps below:

1. Connect Power - Connect the WiSA Subwoofer to the mains via the power lead provided and turn on at the wall socket and via the switch on the back of the subwoofer as shown

2. Activating Pairing Mode - Hold the pairing button for 3 seconds to activate WiSA HT pairing mode. The LED indicator shall flash white indicating pairing mode. 

3. Pair with WiSA HT transmitter - Activate pairing mode/ associate mode in the WiSA HT transmitter. Check the LED on WiSA subwoofer changes from blinking state to solid state. This indicates successful pairing. 

All set, after connecting the WiSA Subwoofer to the WiSA HT transmitter, you are ready to adjust playback level, lowpass frequency and standby time to match your setup. 

• Related Articles

• User Manual - WiSA SubWoofer

  Please download the WiSA SubWoofer User Manual via link -

• Spec Sheet - WiSA SubWoofer

  Please download the WiSA SubWoofer Spec Sheet via link -

• How to connect WiSA Subwoofer hardwired to traditional AVR?

  How to connect WiSA Subwoofer hardwired to traditional AVR? The Lithe Audio 8" Subwoofer can work with any make or model of AVR via the line output, as well as providing futureproofing for WiSA setups. To connect the WiSA Subwoofer to an amplifier ...

• SoundSend settings for 3rd Party Subwoofer

  Issue: Subwoofer not producing enough bass. This will be due to the speaker trim settings and audio settings within the SoundSend APP. At Lithe Audio, we have tested this, and the following settings were found to be the best audio output. If the user ...

• Connection Diagram - WiSA SubWoofer

  Please download the WiSA SubWoofer Connections Diagram via link -