How to Connect Cinema Hub to the Home Network

How to Connect Cinema Hub to the Home Network

To Connect the Cinema Hub to Network follow the instructions below:

1. Using either Android or iOS Download Google Home App 

Scan the QR Code below for direct access to the app.

2. Power on the Cinema Surround Hub. The Cinema Hub is ready for the next step when the ‘Wi-Fi LED’ starts flashing rapidly on the front of the Hub, meaning it has entered ‘Wi-Fi Configuration’ mode.

3. Open the Google Home app and follow the instructions You will be guided through each step in the app

4. Wait for LED to turn solid White After finishing the setup in the Google Home app, the ‘Wi-Fi LED’ should turn solid white, signifying that the Hub is connected to the Wi-Fi and ready to stream

Once Connected this shall enable Airplay, Google Cast, Spotify Connect.

If you have any further issues please contact support@litheaudio.com 

• Related Articles

• Spec Sheet - Cinema Hub

  Please download the Cinema Hub Spec Sheet via link -

• Connection Diagram - Cinema Hub

  Please download the Cinema Hub connection diagram via link -

• Documents - Cinema Hub

  Please download the Cinema Hub user manual via link -

• Wi-Fi Interference effecting WiSA Performance on Cinema Hub

  Introduction The Cinema Hub uses WiSA technology to communicate with compatible speakers. WiSA transmits uncompressed, low-latency audio over the 5.2–5.8GHz spectrum — the same range commonly used by Wi-Fi routers, mesh systems, and extenders. While ...

• Cinema Hub Drop-outs in only one speaker

  Drop-outs in only one speaker If only one speaker looses input to the Cinema Hub (as opposed to all speakers in your setup loosing their input at the same time), it indicates that there may be signals interfering with the WiSA connection. Please ...