How to change the source modes on the Lithe Audio Bluetooth speaker V3

How to change the source modes on the Lithe Audio Bluetooth speaker V3



Here is a video to help explain how to change the source modes on the Lithe Audio Bluetooth ceiling speaker V3.

How to tell this is V3: 2 Optical inputs on the side of the speaker, whereas V2 has 3.5mm pink and green jack inputs. 

Please Note: When Mode button is pressed, only that particular source is Active, the other modes shall be disabled.

For example, if RCA mode is selected, only the RCA connection will output audio, if you were to try and connect via Bluetooth, the speaker will not play via this connection.

These modes can be very helpful for certain project requirements where only RCA or optical mode is only required without Bluetooth activated.

List of source mode LED colours.
  1. Bluetooth mode flashing: BLUE
  2. Optical mode: Solid: PURPLE 
  3. RCA mode Solid: GREEN
  4. Automatic mode flashing: BLUE

Default automatic mode: This automatically detects each source as they are used. Bluetooth is priority, RCA then optical input. They key here being that all sources are available and not dedicated 

If further help is required, don't hesitate to get in touch with us at support@litheaudio.com