How to Access the on Screen Display Menu

How to Access OSD Display Menu

The Cinema Hub has a built in on-screen display using the Remote Control.

It can be seen by choosing the HDMI port on the TV corresponding to the port the Cinema Hub HDMI output is connected to.
When TV has that port selected, press the ’OK’ button on the remote and the OSD menu will open.

From here the systems settings can be managed.

If you have any further issues please contact support@litheaudio.com

Related Articles
How to access local music on Lithe Audio APP
To access Local Music within the Lithe Audio APP, the music files on the selected device MUST be saved in the correct file location. iOS Important note: Local music is defined by iOS as music you own (itunes) not via subscription service like apple ...
Lithe Audio app doesn't show devices on the network using Access Points
When using a router with access points (APs) within a network, and Lithe Audio app does not show devices on the network, several issues could be the cause. These problems often relate to network configurations, device discovery protocols, or ...
How to Fix Wi-Fi speaker connection issues using access points APs
If your Wi-Fi speakers are connected to access points but drop in and out as you move around, several issues could be causing this behavior. Here's a breakdown of potential problems and solutions: 1. Poor Roaming Between Access Points: Problem: If ...
Spec Sheet - Cinema Hub
Please download the Cinema Hub Spec Sheet via link -
Documents - Cinema Hub
Please download the Cinema Hub user manual via link -

Related Articles