Please ensure you have purchased a PRO WiFi Speaker with WiSA bolt-on module and WiSA SoundSend transmitter.
1. Plug the HDMI input from the
WISA Soundsend into the TV’s HDMI Arc port. Once plugged
in, change the sound output settings on your TV to come through the HDMI Arc
port.
2. Ensure that all master speakers are
ready to pair (flashing green) if you get any issues, reset the speaker.
Reset the speaker either through
the Lithe APP or by pressing and holding the reset button on
the face of the speaker next to the LED for 10 seconds or
until the LED starts to fast flash red.
3. Press the button on the SoundSend Transmitter for 5
seconds, the LED on the SoundSend will start to flash white.
Press the reset button (one second) on the PRO WiFi speaker,
the LED will then start to flash purple (the speaker shall
make a beep sound).
4. Perform this task on all WiFi PRO masters, you may find that all speakers are not connected to the TV and the LED flashing purple, if so, re-pair the speakers to the SoundSend transmitter.
NOTE: This
can be done through the SoundSend APP, go to the top right of the APP, advanced
setting and click search for speakers.
When the LED on the speaker goes solid purple connection
OK, once done simply play a film on the TV and the audio shall come from
the speaker.
Each time you turn on the TV the
audio shall come out of the speaker, there is nothing else you need to do!
There are many setup and
positioning settings within the SoundSend APP that could be very helpful in make sure you get the right settings for your environment.
Please follow when
prompted step by step Download Soundsend app: IOS Android