Grouping not working

Grouping not working

If you are finding, when grouping the speaker this un groups itself, please check the firmware of each speaker is to the latest version.

Go to speaker settings> firmware is displayed at the bottom of the page, or an orange round icon displayed on the corner of the room name if an update is required.

Click to update firmware or firmware up to date


    • Related Articles

    • My device will not connect after few months of working fine?

      Please try the following:  Press the reset button on the speaker for 10 seconds to delete the connected device list. Blue led shall start to flash ready for pairing.  Power off the speaker for 30 seconds and turn back on. The speaker will make ...
    • Where should I position my Lithe Audio Subwoofer?

      For the best results produced by the Lithe Audio Micro Subwoofer, we would recommend the following: CORNER OF A ROOM Placing the subwoofer in the corner of the room, can increase the output of the subwoofer, making the sub sound louder as a result. ...
    • Returning Goods

      Contact us via telephone/ Online Chat/ email before sending any goods back, as a form must be completed prior to shipping the items back to us.  Please ensure you include the following with your return: Printed Returns form Details of why you are ...
    • Playing music in commercial premises showroom, wholesaler?

      When playing music on commercial premises you need to ensure you have the correct license to play music  Please ensure you have the correct license for the size, type, number of customers  Link to PRS Tariff For example, playing music in a typical ...
    • My speaker is making a humming noise?

      Is the RCA cable connected to the speaker from a source such as TV, if so the noise is coming from the cable. Have you purchased a shielded cable, if not, we suggest buying a ground loop isolator to suppress the noise from the cable, you can find ...